YOUBER Portable Seawater Desalination Machine Product Introduction 1. As the content of salt in the seawater is too high, that can not be used directly, there are mainly two methods to desalinate seawater, distillation and reverse osmosis. Distillation is mainly used for super-huge type seawater desalination and heat energy rich area, energy consumption is very high. Reverse Osmosis is very widely applicable, low energy consumption and high desalination rate, so it‘s widely used.
2. We use the international best quality of seawater RO membrane. The membrane‘s salt removing rate is very high, with stable performance, safe and reliable. The HP pump we used is the international brand which is specialized in seawater desalination. The treated water quality meets the national life drinking water quality standards (GB5749-85), do not add any chemicals, can be used for direct drinking, fresh and sweet.
3. For the portable use, reliable water, cheap price etc., after a long time of design and practice, we integrate the reliable technology and advanced technology, make our equipment stand out! From here on, you will experience the different use feelings!
In addition to the above advantages, YOUBER portable Seawater desalination machine also has below characteristics:
1. YB series portable seawater desalination machine, volume 64cm L * 50cm W * 50cm H, only weight 60KG, moveable design, easy to move and assemble.
2. YB series portable seawater desalination machine has most matching accessories, can directly use after connect with water and power, easy operation.
3. YB series portable seawater desalination machine has a wide range of power supply, can be connected with common household AC power, gasoline/diesel generator, also can be connected with solar and wind etc. environmental energy.
4. YB series portable seawater desalination machine also has modern design and high integration etc. characteristics.
YOUBER Portable Seawater Desalination Machine Process Flow
Note: * is based on the below testing conditions: 32000ppm NaCl, 800psi (5.5MPa), 77°F (25℃), PH is 8, less than relevant recovery rate (variation range no more than -15%); * Based on the below reasons: different seawater quality in every place, bad seawater quality and bad equipment usage environment, complicated seawater composition, we suggest customer to use “suggested flux”, which can protect the equipment service life;
YB-SWRO-500LPD Portable Seawater Desalination Machine Main configuration
Consumable replacement cycle：
1.5 micron PP filter and 1micron pleated filter : about 3 months
2.Carbon filter: about 6 months
3.UV lamp: about 9000hours, one year.
4.USA DOW RO membrane: about 3 years
Note：the premise of calculation of above replacement cycle is on the basis of satisfying the use and maintenance condition of this equipment, running 20 hours per day
Portable Seawater Desalination Machine Application Range
1. Can be used for ships, fishing boats, yachts, marine, navy drinking water use
2. Can be used for island family, island restaurant, seaside villa, resort drinking water use.
3. Can be used for salty alkali lake drinking water use.
4. Can be used for desert underground water.
5. Offshore operation platform and floating buildings.
Portable Seawater Desalination Machine CE certificate
